관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Solid biofuels — Determination of particle size distribution for uncompressed fuels — Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below (Adopted ISO 17827-2:2016, first edition, 2016-05-15)
| 분야 | |
|---|---|
| 적용범위 | Preface This is the first edition of CAN/CSA-ISO 17827-2, Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below, which is an adoption without modification of the identically titled ISO (International Organization for Standardization) Standard 17827-2 (first edition, 2016-05-15).? For brevity, this Standard will be referred to as "CAN/CSA-ISO 17827-2" throughout.? This Standard is one of two Standards developed by ISO/TC 238 on Solid Biofuels that are being adopted by CSA Group under the series Determination of particle size distribution for uncompressed fuels, which consists of the following:? a) ISO 17827-1, Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above; and? b) ISO 17827-2, Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below.? This Standard specifies a method for the determination of the size distribution of particulate biofuels by the vibrating screen method. The method described is meant for particulate biofuels only, namely, materials that either have been reduced in size, such as most wood fuels, or are physically in a particulate form. This part of CAN/CSA-ISO 17827 applies to particulate uncompressed fuels with a nominal top size of 3,15 mm and below (e.g., sawdust).? Scope This part of ISO 17827 specifies a method for the determination of the size distribution of particulate biofuels by the vibrating screen method. The method described is meant for particulate biofuels only, namely, materials that either have been reduced in size, such as most wood fuels, or are physically in a particulate form. This part of ISO 17827 applies to particulate uncompressed fuels with a nominal top size of 3,15 mm and below (e.g. sawdust). ? |
| 국제분류(ICS)코드 | |
| 페이지수 | 25 |
| Edition |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ISO 17827-2:2024 | Solid biofuels — Determination of particle size distribution for uncompressed fuels — Part 2: Vibrating screen method using sieves with apertures of 3,15 mm and below | 2024-05-23 | 표준 |
| 2 | CSA ISO 17827-2:17 (R2021) | Solid biofuels — Determination of particle size distribution for uncompressed fuels — Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below (Adopted ISO 17827-2:2016, first edition, 2016-05-15) | 2017-01-01 | 표준 |
| 3 | ISO 17827-2:2016 | Solid biofuels — Determination of particle size distribution for uncompressed fuels — Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below | 2016-05-10 | 구판 |
CSA ISO 17827-1:17 (R2021) - Solid biofuels — Determination of particle size distribution for uncompressed fuels — Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above (Adopted ISO 17827-1:2016, first edition, 2016-03-01) 상세보기
ISO 17827-1:2024 - Solid biofuels — Determination of particle size distribution for uncompressed fuels — Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above 상세보기
ISO 17827-2:2024 - Solid biofuels — Determination of particle size distribution for uncompressed fuels — Part 2: Vibrating screen method using sieves with apertures of 3,15 mm and below 상세보기
함께 구입한 상품이 존재하지 않습니다.
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
