관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Solid biofuels — Determination of particle size distribution for uncompressed fuels — Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above (Adopted ISO 17827-1:2016, first edition, 2016-03-01)
| 분야 | |
|---|---|
| 적용범위 | Preface This is the first edition of CAN/CSA-ISO 17827-1, Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above, which is an adoption without modification of the identically titled ISO (International Organization for Standardization) Standard 17827-1 (first edition, 2016-03-01).? For brevity, this Standard will be referred to as "CAN/CSA-ISO 17827-1" throughout.? This Standard is one of two Standards developed by ISO/TC 238 on Solid Biofuels that are being adopted by CSA Group under the series Determination of particle size distribution for uncompressed fuels, which consists of the following:? a) ISO 17827-1, Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above; and? b) ISO 17827-2, Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below.? This Standard specifies a method for the determination of the size distribution of particulate biofuels by the horizontally oscillating screen method. It applies to particulate uncompressed fuels with a nominal top size of 3,15 mm and above, e.g., wood chips, hog fuel, olive stones, etc. The method is intended to characterize material up to a particle size class of P63. For larger P-classes, the characterization is mainly done by hand sorting.? Scope This part of ISO 17827 specifies a method for the determination of the size distribution of particulate biofuels by the horizontally oscillating screen method. It applies to particulate uncompressed fuels with a nominal top size of 3,15 mm and above, e.g. wood chips, hog fuel, olive stones, etc. The method is intended to characterize material up to a particle size class of P63. For larger P-classes, the characterization is mainly done by hand sorting. ? |
| 국제분류(ICS)코드 | |
| 페이지수 | 24 |
| Edition |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ISO 17827-1:2024 | Solid biofuels — Determination of particle size distribution for uncompressed fuels — Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above | 2024-05-23 | 표준 |
| 2 | CSA ISO 17827-1:17 (R2021) | Solid biofuels — Determination of particle size distribution for uncompressed fuels — Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above (Adopted ISO 17827-1:2016, first edition, 2016-03-01) | 2017-01-01 | 표준 |
| 3 | ISO 17827-1:2016 | Solid biofuels — Determination of particle size distribution for uncompressed fuels — Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above | 2016-03-08 | 구판 |
CSA ISO 17827-2:17 (R2021) - Solid biofuels — Determination of particle size distribution for uncompressed fuels — Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below (Adopted ISO 17827-2:2016, first edition, 2016-05-15) 상세보기
ISO 17827-1:2024 - Solid biofuels — Determination of particle size distribution for uncompressed fuels — Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above 상세보기
ISO 17827-2:2024 - Solid biofuels — Determination of particle size distribution for uncompressed fuels — Part 2: Vibrating screen method using sieves with apertures of 3,15 mm and below 상세보기
함께 구입한 상품이 존재하지 않습니다.
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
