관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Motors and generators
| 분야 | 11 : LG Electronics |
|---|---|
| 적용범위 | Preface This is the seventh edition of CSA C22.2 No. 100, Motors and generators, one of a series of Standards issued by the Canadian Standards Association under Part II of the Canadian Electrical Code. It supersedes the previous editions published in 2004, 1995, 1992, 1985, 1982, and 1974.? This Standard is considered suitable for use for conformity assessment within the stated scope of the Standard.? Significant changes from the previous edition are as follows:? a) Updates 1, 2, and 3 from the previous edition incorporated;? b) Clause 3: Definitions - added "Stabilization temperature";? c) Clause 4.5 added;? d) Clause 7.2.1c) added;? e) Clause 7.4.7 added;? f) Clause 10.4.3.2 second paragraph added to clarify temperature;? g) Requirements for protection and control of generators removed from Clause 12.2.7and added to new Clause 12.2.8;? h) Clause 12.2.9 added: Inverters integral with portable generators;? i) Clause 12.2.10 added: Portable generator output circuits;? j) Clause 13.2.2 rewritten for clarity;? k) Note added to Clause 13.3.2 for clarity;? l) Notes 1 and 2 added to Clause for clarity;? m) Table 3: second note added;? n) Table 4: Note 3 updated for clarity;? o) Table 10: Note 4 added;? p) Table 11: Note 4 added;? q) Table 11: Note 3 added; and? r) Figures 5, 6, and 7 updated for clarity.? For general information on the standards of the Canadian Electrical Code, Part II, see the Preface of CAN/CSA-C22.2 No. 0.? Scope 1.1 This Standard applies to electric motors and generators for installation and use, in accordance with the Rules of the Canadian Electrical Code, Part I, in non-hazardous locations.? Note: The term "machine" throughout this Standard should be assumed to mean "motor" and "generator".? 1.2 Clauses 2 to 7 are general in nature and apply, unless otherwise noted, to the motors and generators covered by Clauses 8 to 13 as follows:? a) Clause 8 - DC machines and AC machines (including universal motors) in IEC frame size 80 and smaller;? b) Clause 9 - AC machines (including universal motors) in IEC frame sizes 90 to 280 and rated 750 V ac and less;? c) Clause 10 - AC machines rated over 750 V ac or in IEC frame size 315 and larger;? d) Clause 11 - DC machines in IEC frame size 90 and larger;? e) Clause 12 - portable and standby generators; and? f) Clause 13 - inverter-duty AC machines.? 1.3 This Standard provides basic requirements for machines and does not exclude any additional requirements given in other Standards of the Canadian Electrical Code, Part II.? 1.4 This Standard does not apply to? a) sealed- (hermetic-) type motors such as those used in refrigerant compressors; or? b) electric machines for use in aircraft, marine service installations, drives for land transportation equipment, or machines used in underground mining.? 1.5 In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the standard.? Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material.? Notes to tables and figures are considered part of the table or figure and may be written as requirements.? Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application. ? |
| 국제분류(ICS)코드 | |
| 페이지수 | 97 |
| Edition |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | CSA C22.2 NO. 100:14 (R2024) | Motors and generators | 2014-01-01 | 표준 |
관련상품이 존재하지 않습니다.
CSA C22.2 NO. 107.3:14 (R2024) - Uninterruptible power systems (Binational standard with UL 1778) 상세보기
CSA C88:16 (R2021) - Power transformers and reactors 상세보기
CSA C22.2 NO. 248.2:00 (R2019) - Low-Voltage Fuses - Part 2: Class C Fuses (Tri-National standard, with UL 248-2 and NMX-J-009/248/2-2000-ANCE) 상세보기
CSA C22.2 NO. 248.3:00 (R2019) - Low-Voltage Fuses - Part 3: Class CA and CB Fuses (Tri-National standard, with UL 248-3 and NMX-J-009/248/3-2000-ANCE) 상세보기
CSA C22.2 NO. 248.4:00 (R2019) - Low-Voltage Fuses - Part 4: Class CC Fuses (Tri-National standard, with UL 248-4 and NMX-J-009/248/4-2000-ANCE) 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
