관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Portable tanks for the transport of dangerous goods
| 분야 | |
|---|---|
| 적용범위 | Preface This is the second edition of CSA B625, Portable tanks for the transport of dangerous goods. It supersedes the previous edition, published in 2008. This Standard is one of a series of Standards prepared for use in conjunction with the Transportation of Dangerous Goods Regulations, which adopt this Standard by reference. Because the Regulations may adopt this Standard with certain exceptions or additional requirements, they should always be consulted in conjunction with this Standard. Scope 1.1 This Standard applies to the design and manufacture of UN portable tanks and their approval by the Competent Authority of Canada. Such UN portable tanks shall have a capacity greater than 450 L and may or may not meet the definition of "container" within the terms of the International Maritime Organization's International Convention for Safe Containers, 1972, as amended. This Standard also applies to the selection, use, inspection, testing, and repair of UN portable tanks, as well as IMO-type portable tanks (IMO-type 1, 2, 5, or 7 tanks), and IM 101 and IM 102 portable tanks, for handling, offering for transport, or transport of dangerous goods in Canada, whether or not they meet the definition of "container" within the terms of the International Convention for Safe Containers, 1972, as amended. 1.2 The testing and evaluation of a product in accordance with this Standard can involve the use of processes, materials, and/or equipment that can be hazardous. This Standard does not address the occupational health and safety aspects associated with its use. Anyone using this Standard has the responsibility to consult the appropriate authorities and establish appropriate health and safety practices in conjunction with any applicable regulatory requirements. 1.3 The Transportation of Dangerous Goods Act, 1992, and the Transportation of Dangerous Goods Regulations may set out requirements that are additional to or different from those in this Standard. Where there is an inconsistency between the requirements of this Standard and those of the Act or Regulations, the Act or Regulations takes precedence to the extent of the inconsistency. 1.4 This Standard sets out certain minimum requirements regarding the design, construction, testing, selection, and use of portable tanks. It is essential to exercise competent judgment in conjunction with this Standard. In some circumstances, it is necessary to exceed the minimum requirements of this Standard so that adequate public safety is achieved. 1.5 In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; "may" is used to express an option or that which is permissible within the limits of the standard; and "can" is used to express possibility or capability. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application. |
| 국제분류(ICS)코드 | |
| 페이지수 | 176 |
| Edition |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM B625-21 | Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloy, Ni-Fe-Cr-Si Alloy, |
2021-11-01 | 표준 |
| 2 | ASTM B625-21 REDLINE | Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloy, Ni-Fe-Cr-Si Alloy, |
2021-11-01 | 표준 |
| 3 | CSA B625:20 | Portable tanks for the transport of dangerous goods | 2020-01-01 | 표준 |
| 4 | ASTM B625-17 | Standard Specification for UNS N08925, UNS N08031, UNS N08034, UNS N08932, UNS N08926, UNS N08354, UNS N08830, and UNS R20033 Plate, Sheet, and Strip | 2017-07-01 | 구판 |
| 5 | ASTM B625-17 REDLINE | Standard Specification for UNS N08925, UNS N08031, UNS N08034, UNS N08932, UNS N08926, UNS N08354, UNS N08830, and UNS R20033 Plate, Sheet, and Strip | 2017-07-01 | 구판 |
| 6 | ASTM B625-14 | Standard Specification for UNS N08925, UNS N08031, UNS N08932, UNS N08926, |
2014-11-15 | 구판 |
| 7 | B625-13 (R2018) | Portable tanks for the transport of dangerous goods | 2013-01-01 | 표준 |
| 8 | ASTM B625-05(2011) | Standard Specification for UNS N08925, UNS N08031, UNS N08932, UNS N08926, UNS N08354, and UNS R20033 Plate, Sheet, and Strip | 2011-05-01 | 구판 |
| 9 | ASTM B625-05 | Standard Specification for UNS N08925, UNS N08031, UNS N08932, UNS N08926, UNS N08354, and UNS R20033 Plate, Sheet, and Strip | 2005-06-01 | 구판 |
| 10 | ASTM B625-04a | Standard Specification for UNS N08904, UNS N08925, UNS N08031, UNS N08932, UNS N08926, and UNS R20033 Plate, Sheet, and Strip | 2004-10-01 | 구판 |
| 11 | ASTM B625-04 | Standard Specification for UNS N08904, UNS N08925, UNS N08031, UNS N08932, UNS N08926, and UNS R20033 Plate, Sheet, and Strip | 2004-02-01 | 구판 |
| 12 | ASTM B625-99 | Standard Specification for UNS N08904, UNS N08925, UNS N08031, UNS N08932, UNS N08926, and UNS R20033 Plate, Sheet, and Strip | 1999-05-10 | 구판 |
관련상품이 존재하지 않습니다.
N286.3-99 (R2004) - Construction Quality Assurance for Nuclear Power Plants Published by CSA Group in 1999, Reaffirmed in 2004, Withdrawn 상세보기
C22.2 NO. 178-1978 (R2006) - Automatic Transfer Switches 0 Edition, Published by CSA Group in 1978, Reaffirmed in 2006, Withdrawn 상세보기
SPE-2000-94 - Guide for Electrical Equipment for Installation and Use in Canada 상세보기
CAN/CSA-C867.2-09 (R2014) - Performance of decorative light strings.Published by CSA Group in 2009, Reaffirmed in 2014, Withdrawn 상세보기
N292.0-14/N292.3-14 PACKAGE - Consists of N292.0-14, General principles for the management of radioactive waste and irradiated fuel and N292.3-14, Management of low- and intermediate-level radioactive waste 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
