관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Petroleum and natural gas industries - Specific requirements for offshore structures - Part 6: Marine operations (Adopted ISO 19901-6:2009, first edition, 2009-12-15)
| 분야 | |
|---|---|
| 적용범위 | Preface This is the first edition of CAN/CSA-ISO 19901-6, Petroleum and natural gas industries - Specific requirements for offshore structures - Part 6: Marine operations, which is an adoption, without modification, of the identically titled ISO (International Organization for Standardization) Standard 19901-6 (first edition, 2009-12-15). This edition of CAN/CSA-ISO 19901-6 replaces CAN/CSA-S475-03, Sea operations. At the time of publication, ISO 19901-6:2009 is available from ISO in English only. CSA will publish the French version when it becomes available from ISO. Scope This part of ISO 19901 provides requirements and guidance for the planning and engineering of marine operations, encompassing the design and analysis of the components, systems, equipment and procedures required to perform marine operations, as well as the methods or procedures developed to carry them out safely. This part of ISO 19901 is applicable to marine operations for offshore structures including: steel and concrete gravity base structures (GBS) piled steel structures and compliant towers tension leg platforms (TLP) deep draught floaters (DDF), including spars or deep draught caisson vessels (DDCV) floating production semi-submersibles (FPSS) floating production, storage and offloading vessels (FPSO) other types of floating production systems (FPS) mobile offshore units (MOU) topsides and components of any of the above subsea templates and similar structures gravity, piled, drag embedded and suction or other anchors tendon foundations associated mooring systems. This document is also applicable to modifications of existing structures, e.g. installation of additional topsides modules. This part of ISO 19901 is not applicable to the following marine operations: a) construction activities, e.g. in a fabrication yard onshore, where there is no exposure to the marine environment b) drilling, processing and petrochemical activities c) routine marine activities during the service life of the structure d) drilling from mobile offshore drilling units (MODU) e) installation of pipelines, flowlines, risers and umbilicals f) diving. |
| 국제분류(ICS)코드 | |
| 페이지수 | 192 |
| Edition |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ISO 19901-6:2009/Cor 1:2011 | 2011-11-23 | 표준 | |
| 2 | CAN/CSA-ISO 19901-6-10 (R2020) | Petroleum and natural gas industries - Specific requirements for offshore structures - Part 6: Marine operations (Adopted ISO 19901-6:2009, first edition, 2009-12-15) | 2010-01-01 | 표준 |
| 3 | ISO 19901-6:2009 | Petroleum and natural gas industries — Specific requirements for offshore structures — Part 6: Marine operations | 2009-12-03 | 표준 |
ISO/DIS 19901-7 - Petroleum and natural gas industries — Specific requirements for offshore structures — Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units 상세보기
ISO/FDIS 19901-4 - Oil and gas industries including lower carbon energy — Specific requirements for offshore structures — Part 4: Geotechnical design considerations 상세보기
ISO/DIS 19901-1 - Oil and gas industries including lower carbon energy — Specific requirements for offshore structures — Part 1: Metocean design and operating considerations 상세보기
ISO/DIS 19901-7 - Oil and gas industries including lower carbon energy — Specific requirements for offshore structures — Part 7: Station-keeping systems for floating offshore structures and mobile offshore units 상세보기
ISO/DIS 19901-2 - Oil and gas industries including lower carbon energy — Specific requirements for offshore structures — Part 2: Seismic design procedures and criteria 상세보기
함께 구입한 상품이 존재하지 않습니다.
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
