관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Certification of manufacturers of steel building systems
| 분야 | |
|---|---|
| 적용범위 | Preface This is the third edition of CSA A660, Certification of manufacturers of steel building systems. It supersedes the previous editions, published in 2004 and 1991. Scope 1.1 This Standard applies to the certification of manufacturers of steel building systems. 1.2 This Standard prescribes the procedure for certification based on an audit of a manufacturer's plants and facilities by the certification body. 1.3 This Standard provides the requirements for a certificate of design and manufacturing conformance for each steel building system supplied by a certified manufacturer (see Clause 12). Note: This should not be construed as third-party certification of the steel building system. 1.4 Inspection of the structure in its final erected state is outside the scope of this Standard. Note: Inspection and approval requirements are under the jurisdiction of applicable building authorities. 1.5 In CSA Standards, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; "may" is used to express an option or that which is permissible within the limits of the standard; and "can" is used to express possibility or capability. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application. |
| 국제분류(ICS)코드 | |
| 페이지수 | 28 |
| Edition |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM A660-96(2010) | Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service | 2010-04-01 | 구판 |
| 2 | A660-10 (R2019) | Certification of manufacturers of steel building systems | 2010-01-01 | 표준 |
| 3 | ASTM A660-96(2005) | Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service | 2005-10-01 | 구판 |
| 4 | ASTM A660-96 | Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service | 1996-10-10 | 구판 |
| 5 | ASTM A660-96(2001) | Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service | 1996-10-10 | 구판 |
관련상품이 존재하지 않습니다.
C22.1-15 - Canadian Electrical Code, Part I (23rd Edition), Safety Standard for Electrical Installations 상세보기
CSA W47.1:19 - Certification of companies for fusion welding of steel 상세보기
N286.3-99 (R2004) - Construction Quality Assurance for Nuclear Power Plants Published by CSA Group in 1999, Reaffirmed in 2004, Withdrawn 상세보기
C22.2 NO. 178-1978 (R2006) - Automatic Transfer Switches 0 Edition, Published by CSA Group in 1978, Reaffirmed in 2006, Withdrawn 상세보기
SPE-2000-94 - Guide for Electrical Equipment for Installation and Use in Canada 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
