관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Rigid PVC (unplasticized) conduit
| 분야 | 11 : LG Electronics |
|---|---|
| 적용범위 | Preface This is the second edition of CSA C22.2 No. 211.2, Rigid PVC (unplasticized) conduit, one of a series of Standards issued by the Canadian Standards Association under Part II of the Canadian Electrical Code. It supersedes the previous edition published in 1984. This edition includes the following changes: (a) addition of metric designators for trade sizes; (b) addition of requirements for use of PVC industrial scrap; (c) addition of sunlight resistance requirements and markings; and (d) revisions to prepare for future regional harmonization.? Scope 1.1 This Standard applies to rigid PVC (unplasticized) conduit, elbows, bends, and couplings, intended for use at a continuous operating temperature of 75 °C, for the installation of wires and cables in accordance with the Rules of the Canadian Electrical Code, Part I, for ordinary locations.? 1.2 The products covered by this Standard are not threaded and are intended to be joined together by couplings using a suitable solvent cement.? 1.3 In CSA Standards, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; "may" is used to express an option or that which is permissible within the limits of the standard; and "can" is used to express possibility or capability. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.? 1.4 The values given in SI (metric) units are the standard. The values given in parentheses are for information only. |
| 국제분류(ICS)코드 | |
| 페이지수 | 38 |
| Edition |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | CSA C22.2 NO. 211.2:06 (R2021) | Rigid PVC (unplasticized) conduit | 2006-01-01 | 표준 |
관련상품이 존재하지 않습니다.
CSA S474:04 (R2019) - Concrete structures 상세보기
CSA C22.2 NO. 254:05 (R2019) - Motor Control Centres (Tri-National standard, with UL 845 and NMX-J-353-ANCE) 상세보기
C22.2 NO. 45.1-07 (R2017) - Electrical Rigid Metal Conduit - Steel (Tri-National standard, with UL 6 and NMX-J-534-ANCE-2007) 상세보기
CSA C22.2 NO. 83.1:07 (R2022) - Electrical Metallic Tubing - Steel (Tri-National Standard, with UL 797 and NMX-J-536-ANCE-2007) 상세보기
CSA C22.2 NO. 107.3:14 (R2024) - Uninterruptible power systems (Binational standard with UL 1778) 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
