관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
절판(중지)
Concrete structures
| 언어 | 제공형태 | 판매가격 | 선택 |
|---|---|---|---|
|
영어 |
보안PDF |
268,700원 |
|
| 분야 | |
|---|---|
| 적용범위 | This is the third edition of CSA S474, Concrete structures. It supersedes the second edition, published in 1994, and the preliminary edition, published in 1989. This Standard is the fourth of five CSA Standards that form the Code for the design, construction, and installation of offshore structures. The others are (a) CSA S471, General requirements, design criteria, the environment, and loads; (b) CAN/CSA-S472, Foundations; (c) CSA S473, Steel structures; and (d) CAN/CSA-S475, Sea Operations. The Code was developed in the 1980s and 1990s at the request of petroleum industry and regulatory authorities, which recognized that hydrocarbon production structures would likely become common in Canada.s offshore regions. In 1984, CSA formed a special Executive Management Committee to establish a program for developing offshore engineering standards. This evolved into the Strategic Steering Committee on Offshore Structures and the Technical Committees responsible for producing the Code's five Standards. The Standards were developed with the participation of representatives from government, regulatory authorities, industry, classification societies, universities, and research and other institutions. ? Scope 1.1 This Standard specifies material selection, design, and construction requirements for fixed concrete offshore structures. It is intended for use by engineers experienced in the design and construction of offshore structures. 1.2 In CSA Standards, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; "may" is used to express an option or that which is permissible within the limits of the standard; and "can" is used to express possibility or capability. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Legends to equations and figures are considered requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application. |
| 국제분류(ICS)코드 | |
| 페이지수 | 70 |
| Edition |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|
관련상품이 존재하지 않습니다.
CSA C22.2 NO. 254:05 (R2019) - Motor Control Centres (Tri-National standard, with UL 845 and NMX-J-353-ANCE) 상세보기
CSA C22.2 NO. 211.2:06 (R2021) - Rigid PVC (unplasticized) conduit 상세보기
C22.2 NO. 45.1-07 (R2017) - Electrical Rigid Metal Conduit - Steel (Tri-National standard, with UL 6 and NMX-J-534-ANCE-2007) 상세보기
CSA C22.2 NO. 83.1:07 (R2022) - Electrical Metallic Tubing - Steel (Tri-National Standard, with UL 797 and NMX-J-536-ANCE-2007) 상세보기
CSA C22.2 NO. 107.3:14 (R2024) - Uninterruptible power systems (Binational standard with UL 1778) 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
