관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Repair of Pressure Equipment and Piping (PCC-2 - 2015)
| 분야 | PCC : Post Construction |
|---|---|
| 적용범위 | ASME PCC-2 provides methods for repair of equipment and piping within the scope of ASME Pressure Technology Codes and Standards after it has been placed in service. These repair methods include relevant design, fabrication, examination, and testing practices and may be temporary or permanent, depending on the circumstances. The methods provided in this Standard address the repair of components when repair is deemed necessary based on appropriate inspection and flaw assessment. These inspection and flaw evaluation methods are not covered in this document, but are covered in other post-construction codes and standards. Only technical procedures and information are provided; administrative or policy requirements are outside of the scope of this Standard. Key changes to this revision include a new supplemental article on repair welding considerations for Cr-Mo steel pressure vessels, and updates to Article 2.2 on External Weld Buildup to Repair Internal Thinning and Article 4.1 on Nonmetallic Composite Repair Systems: High Risk Applications. ASME PCC-2 serves as a companion to the other codes in ASME?s PCC series. Together, they remain essential references for anyone engaged with pressure equipment and piping. Careful application of these ASME PCC codes will help users to comply with applicable regulations within their jurisdictions, while achieving the operational, cost and safety benets to be gained from the many industry best-practices detailed within these volumes. Intended for repair, maintenance, owners, regulators, inspectors, manufacturers, designers, and operators of pressure equipment and piping, plus all potential governing entities. |
| 국제분류(ICS)코드 | |
| 페이지수 | 240 |
| Edition |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASME PCC-2-2022 | Repair of Pressure Equipment and Piping | 2022-09-02 | 표준 |
| 2 | ASME PCC-2-2018 | Repair of Pressure Equipment and Piping | 2018-01-01 | 구판 |
| 3 | ASME PCC-2-2015 | Repair of Pressure Equipment and Piping (PCC-2 - 2015) | 2015-01-01 | 구판 |
| 4 | ASME PCC-2-2011 | Repair of Pressure Equipment and Piping (PCC-2 - 2011) | 2011-01-01 | 구판 |
| 5 | ASME PCC-2-2008 | Repair of Pressure Equipment and Piping (PCC-2 - 2008) | 2008-01-01 | 구판 |
| 6 | ASME PCC-2-2006 | Repair of Pressure Equipment and Piping (PCC-2 - 2006) | 2006-01-01 | 구판 |
함께 구입한 상품이 존재하지 않습니다.
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
