ASTM E352-23 REDLINE Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels

관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.

PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)

PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)

표준 판매

ASTM E352-23 REDLINE

Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels

- 발행일 : 2023-11-15
- 발행기관 : ASTM

레드라인 이란?: 최신표준과 직전 구판표준의 변경내용을 포함하고 있는 버전. 구입 시 최신표준과 레드라인 두 개 파일을 제공합니다.(단, ISO는 제외)

언어	제공형태	판매가격	선택
(레드라인) 영어	PDF	184,800원
(레드라인) 영어	PRINT	184,800원

장바구니 담기

상품이 장바구니에 담겼습니다.

장바구니로 이동

상세정보

분야

적용범위

1.1?These test methods cover the chemical analysis of tool steels and other similar medium- and high-alloy steels having chemical compositions within the following limits:

Element	Composition Range,?%
Aluminum	??0.005 to 1.5
Boron	??0.001 to 0.10
Carbon	??0.03? to 2.50
Chromium	??0.10? to 14.0
Cobalt	??0.10? to 14.0
Copper	??0.01? to 2.0
Lead	??0.001 to 0.01
Manganese	??0.10? to 15.00
Molybdenum	??0.01? to 10.00
Nickel	??0.02? to 4.00
Nitrogen	??0.001 to 0.20
Phosphorus	??0.002 to 0.05
Silicon	??0.10? to 2.50
Sulfur	??0.002 to 0.40
Tungsten	??0.01? to 21.00
Vanadium	??0.02? to 5.50

1.2?The test methods in this standard are contained in the sections indicated below:

?	?	Sections
Carbon, Total, by the Combustion? ?Thermal Conductivity Method? ?Discontinued 1986	?	125?135
Carbon, Total, by the Combustion Gravimetric ?Method?Discontinued 2012	?	78?88
Chromium by the Atomic Absorption ?Spectrometry Method	(0.006 % to 1.00?%)	174?183
Chromium by the Peroxydisulfate ?Oxidation?Titration Method	??(0.10 % to 14.00?%)	184?192
Chromium by the Peroxydisulfate-Oxidation ?Titrimetric Method?Discontinued 1980	?	117?124
Cobalt by the Ion-Exchange? ?Potentiometric Titration Method	????(2 % to 14?%)?	52?59
Cobalt by the Nitroso-R-Salt ? Spectrophotometric Method	?(0.10 % to 5.0?%)?	60?69
Copper by the Neocuproine ? Spectrophotometric Method	?(0.01 % to 2.00?%)	89?98
Copper by the Sulfide Precipitation- ?Electrodeposition Gravimetric Method	? (0.01 % to 2.0?%)?	70?77
Lead by the Ion-Exchange?Atomic ? Absorption Spectrometry Method	(0.001 % to 0.01?%)	99?108
Manganese by the Periodate ? Spectrophotometric Method	?(0.10 % to 5.00?%)	9?18
Molybdenum by the Ion Exchange? ?8-Hydroxyquinoline Gravimetric Method?	?	203?210
Molybdenum by the Thiocyanate Spectrophotometric Method	?(0.01 % to 1.50?%)	162?173
Nickel by the Dimethylglyoxime ?Gravimetric Method	(0.1 % to 4.0 %)	144?151
Phosphorus by the Alkalimetric Method	?(0.01 % to 0.05?%)	136?143
Phosphorus by the Molybdenum Blue ? Spectrophotometric Method	(0.002 % to 0.05?%)	19?29
Silicon by the Gravimetric Method	?(0.10 % to 2.50?%)	45?51
Sulfur by the Gravimetric ?Method?Discontinued 1988	?	29?35
Sulfur by the Combustion-Iodate ? Titration Method?Discontinued 2012	?	36?44
Sulfur by the Chromatographic ?Gravimetric Method?Discontinued 1980	?	109?116
Tin by the Solvent Extraction? ?Atomic Absorption Spectrometry Method	(0.002 % to 0.10?%)	152?161
Vanadium by the Atomic ?Absorption Spectrometry Method	(0.006 % to 0.15?%)	193?202

1.3?Test methods for the determination of carbon and sulfur not included in this standard can be found in Test Methods E1019.

1.4?Some of the composition ranges given in 1.1 are too broad to be covered by a single test method and therefore this standard contains multiple test methods for some elements. The user must select the proper test method by matching the information given in the Scope and Interference sections of each test method with the composition of the alloy to be analyzed.

1.5?The values stated in SI units are to be regarded as standard.

1.6?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific hazards statements are given in Section 6 and in special “Warning” paragraphs throughout these test methods.

1.7?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

국제분류(ICS)코드

페이지수

Edition

이력정보

No.	표준번호	표준명	발행일	상태
1	ASTM E352-23	Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels	2023-11-15	표준
2	ASTM E352-23 REDLINE	Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels	2023-11-15	표준
3	ASTM E352-18e1	Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels	2018-07-01	구판
4	ASTM E352-18	Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels	2018-07-01	구판
5	ASTM E352-18 REDLINE	Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels	2018-07-01	구판
6	ASTM E352-13	Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels	2013-02-01	구판
7	ASTM E352-93(2006)	Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels	2006-06-01	구판
8	ASTM E352-93(2000)e1	Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels	2000-01-01	구판

관련상품

관련상품이 존재하지 않습니다.
다른 사람이 함께 구입한 상품

ASTM E350-23 REDLINE - Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron 상세보기

KS D 1673-9 - 철 및 강 — 유도결합 플라스마 방출 분광 분석법 — 제9부: 텅스텐 함유량의 정량 — 황산 인산 분해법 상세보기

KS D 1673-6 - 철 및 강 — 유도결합 플라스마 방출 분광 분석법 — 제6부: 붕소 함유량의 정량 — 황산 인산 분해법 상세보기

JIS G 3463:2023 - Stainless steel tubes for boiler and heat exchanger 상세보기

JIS G 3461:2023 - Carbon steel tubes for boiler and heat exchanger 상세보기
추천 상품

IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기

IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기

KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기

KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기

KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기

해외표준

ASTM E352-23 REDLINE

상세정보

이력정보

관련상품

다른 사람이 함께 구입한 상품

추천 상품

전체서비스 보기