관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
| 분야 | |
|---|---|
| 적용범위 | 1.1?This specification covers wrought stainless steel fittings for pressure piping applications.2 1.2?Several grades of austenitic stainless steel alloys are included in this specification Grades are designated with a prefix, WP or CR, based on the applicable ASME or MSS dimensional and rating standards, respectively. 1.3?For each of the WP stainless grades, several classes of fittings are covered, to indicate whether seamless or welded construction was utilized. Class designations are also utilized to indicate the nondestructive test method and extent of nondestructive examination (NDE). Table 1 is a general summary of the fitting classes applicable to all WP grades of stainless steel covered by this specification. There are no classes for the CR grades. Specific requirements are covered elsewhere. 1.4?This specification is expressed in both inch-pound units and in SI units. However, unless the order specifies the applicable “M” specification designation (SI units), the material shall be furnished to inch-pound units. 1.5?The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.6?This specification does not apply to cast steel fittings. Austenitic stainless steel castings are covered in Specifications A351/A351M, A743/A743M, and A744/A744M. 1.7?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
| 국제분류(ICS)코드 | |
| 페이지수 | 11 |
| Edition | 22b |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM A403/A403M-22b | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings | 2022-11-01 | 표준 |
| 2 | ASTM A403/A403M-22b REDLINE | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings | 2022-11-01 | 표준 |
| 3 | ASTM A403/A403M-22a REDLINE | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings | 2022-09-01 | 구판 |
| 4 | ASTM A403/A403M-22a | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings | 2022-09-01 | 구판 |
| 5 | ASTM A403/A403M-22 | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings | 2022-03-01 | 구판 |
| 6 | ASTM A403/A403M-22 REDLINE | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings | 2022-03-01 | 구판 |
| 7 | ASTM A403/A403M-20 REDLINE | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings | 2020-03-01 | 구판 |
| 8 | ASTM A403/A403M-20 | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings | 2020-03-01 | 구판 |
| 9 | ASTM A403/A403M-19a | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings | 2019-11-01 | 구판 |
| 10 | ASTM A403/A403M-19a REDLINE | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings | 2019-11-01 | 구판 |
| 11 | ASTM A403/A403M-19 REDLINE | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings | 2019-03-01 | 구판 |
| 12 | ASTM A403/A403M-19 | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings | 2019-03-01 | 구판 |
| 13 | ASTM A403/A403M-18a | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings | 2018-09-01 | 구판 |
| 14 | ASTM A403/A403M-18a REDLINE | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings | 2018-09-01 | 구판 |
| 15 | ASTM A403/A403M-18 | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings | 2018-03-01 | 구판 |
| 16 | ASTM A403/A403M-16 | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings | 2016-05-01 | 구판 |
| 17 | ASTM A403/A403M-15 | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings | 2015-05-01 | 구판 |
| 18 | ASTM A403/A403M-14 | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings | 2014-10-01 | 구판 |
| 19 | ASTM A403/A403M-13a | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings | 2013-10-01 | 구판 |
| 20 | ASTM A403/A403M-13 | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings | 2013-05-01 | 구판 |
| 21 | ASTM A403/A403M-12 | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings | 2012-05-01 | 구판 |
| 22 | ASTM A403/A403M-11 | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings | 2011-10-01 | 구판 |
| 23 | ASTM A403/A403M-10a | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings | 2010-12-01 | 구판 |
| 24 | ASTM A403/A403M-10 | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings | 2010-05-01 | 구판 |
| 25 | ASTM A403/A403M-09 | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings | 2009-10-01 | 구판 |
| 26 | ASTM A403/A403M-07a | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings | 2007-11-01 | 구판 |
| 27 | ASTM A403/A403M-07 | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings | 2007-04-01 | 구판 |
| 28 | ASTM A403/A403M-06 | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings | 2006-03-01 | 구판 |
| 29 | ASTM A403/A403M-04 | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings | 2004-05-01 | 구판 |
| 30 | ASTM A403/A403M-03a | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings | 2003-05-10 | 구판 |
| 31 | ASTM A403/A403M-03 | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings | 2003-04-10 | 구판 |
| 32 | ASTM A403/A403M-02 | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings | 2002-06-10 | 구판 |
| 33 | ASTM A403/A403M-00b | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings | 2001-10-10 | 구판 |
| 34 | ASTM A403/A403M-01 | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings | 2001-10-10 | 구판 |
| 35 | ASTM A403/A403M-98 | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings | 구판 |
관련상품이 존재하지 않습니다.
JIS Z 2241:2022 - Metallic materials -- Tensile testing -- Method of test at room temperature 상세보기
ASTM A240/A240M-23 REDLINE - Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications 상세보기
ASTM A312/A312M-22a REDLINE - Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes 상세보기
KS D 0223 - 스테인리스강의 황산 ･ 황산제2철 부식 시험방법 상세보기
KS D 3698 - 냉간 압연 스테인리스 강판 및 강대 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
