관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Standard Specification for Flexible Aerogel Insulation
| 분야 | 04.06 : 보온, 방음 |
|---|---|
| 적용범위 | 1.1 This specification covers the classification and performance of flexible aerogel thermal insulation. This will cover the range of continuous exposure operating temperatures from –321°F (–196°C) up to 1200°F (649°C). 1.2 For satisfactory performance, properly installed protective vapor retarders or barriers shall be used on below ambient temperature applications to reduce movement of moisture through or around the insulation to the colder surface. Failure to use a vapor retarder or barrier could lead to insulation and system non-performance. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 The following safety hazards caveat pertains only to the test methods described in this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
| 국제분류(ICS)코드 | 91.100.60 : 방열 및 방음 재료 |
| 페이지수 | 5 |
| Edition | 20a |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM C1728-23 | Standard Specification for Flexible Aerogel Insulation | 2023-04-01 | 표준 |
| 2 | ASTM C1728-23 REDLINE | Standard Specification for Flexible Aerogel Insulation | 2023-04-01 | 표준 |
| 3 | ASTM C1728-22 | Standard Specification for Flexible Aerogel Insulation | 2022-10-01 | 구판 |
| 4 | ASTM C1728-22 REDLINE | Standard Specification for Flexible Aerogel Insulation | 2022-10-01 | 구판 |
| 5 | ASTM C1728-21 | Standard Specification for Flexible Aerogel Insulation | 2021-03-01 | 구판 |
| 6 | ASTM C1728-21 REDLINE | Standard Specification for Flexible Aerogel Insulation | 2021-03-01 | 구판 |
| 7 | ASTM C1728-20b | Standard Specification for Flexible Aerogel Insulation | 2020-12-01 | 구판 |
| 8 | ASTM C1728-20a REDLINE | Standard Specification for Flexible Aerogel Insulation | 2020-05-15 | 구판 |
| 9 | ASTM C1728-20a | Standard Specification for Flexible Aerogel Insulation | 2020-05-15 | 구판 |
| 10 | ASTM C1728-20 | Standard Specification for Flexible Aerogel Insulation | 2020-02-01 | 구판 |
| 11 | ASTM C1728-20 REDLINE | Standard Specification for Flexible Aerogel Insulation | 2020-02-01 | 구판 |
| 12 | ASTM C1728-17 REDLINE | Standard Specification for Flexible Aerogel Insulation | 2017-02-01 | 구판 |
| 13 | ASTM C1728-17 | Standard Specification for Flexible Aerogel Insulation | 2017-02-01 | 구판 |
| 14 | ASTM C1728-13 | Standard Specification for Flexible Aerogel Insulation | 2013-05-01 | 구판 |
| 15 | ASTM C1728-12 | Standard Specification for Flexible Aerogel Insulation | 2012-01-15 | 구판 |
관련상품이 존재하지 않습니다.
ISO 16534:2020 - Thermal insulating products for building applications — Determination of compressive creep 상세보기
ISO 7345:2018 - Thermal performance of buildings and building components — Physical quantities and definitions 상세보기
ISO 12624:2011 - Thermal insulating products for building equipment and industrial installations — Determination of trace quantities of water soluble chloride, fluoride, silicate, sodium ions and pH 상세보기
DIN EN 14303:2016-08 - Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification 상세보기
DIN EN 13950:2014-09 - Gypsum board thermal/acoustic insulation composite panels - Definitions, requirements and test methods 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
