관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
분야 | 04.01 : 시멘트, 석회, 석고 |
---|---|
적용범위 | 1.1 This practice covers the minimum requirements and procedures for field or prefabricated application of Class PB Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage. Class PB EIFS are systems applied over insulation board, in which the base coat ranges from not less than 1/16 in. (1.6 mm) to 1/4 in. (6.4 mm) in dry thickness, depending upon the number of nonmetallic reinforcing mesh layers encapsulated in the base coat (see Specification E2568). The base coat is then covered with a finish coat of varying thickness in a variety of textures and colors. EIFS with Drainage provides a mechanism to drain incidental moisture 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 The text of this practice references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as a requirement of the standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
국제분류(ICS)코드 | 91.100.99 : 기타 구조물 재료 |
페이지수 | 9 |
Edition | 13(2019) |
No. | 표준번호 | 표준명 | 발행일 | 상태 |
---|---|---|---|---|
1 | ASTM C1397-13(2019) | Standard Practice for Application of Class PB Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage | 2019-03-01 | 표준 |
2 | ASTM C1397-13 | Standard Practice for Application of Class PB Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage | 2013-09-01 | 구판 |
3 | ASTM C1397-13 REDLINE | Standard Practice for Application of Class PB Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage | 2013-09-01 | 구판 |
4 | ASTM C1397-09 | Standard Practice for Application of Class PB Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage | 2009-07-15 | 구판 |
5 | ASTM C1397-05 | Standard Practice for Application of Class PB Exterior Insulation and Finish Systems | 2005-10-01 | 구판 |
6 | ASTM C1397-04 | Standard Practice for Application of Class PB Exterior Insulation and Finish Systems | 2004-08-01 | 구판 |
7 | ASTM C1397-03 | Standard Practice for Application of Class PB Exterior Insulation and Finish Systems | 2003-06-10 | 구판 |
8 | ASTM C1397-02 | Standard Practice for Application of Class PB Exterior Insulation and Finish Systems | 2002-12-10 | 구판 |
9 | ASTM C1397-98 | Standard Practice for Application of Class PB Exterior Insulation and Finish Systems | 1998-08-10 | 구판 |
관련상품이 존재하지 않습니다.
ASTM C1550-20 - Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel) 상세보기
ASTM C1609/C1609M-19a - Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading) 상세보기
ASTM C1535-05(2017) - Standard Practice for Application of Exterior Insulation and Finish Systems Class PI 상세보기
ASTM E2568-17a - Standard Specification for PB Exterior Insulation and Finish Systems 상세보기
GB/T 30595-2014 - External thermal insulation composite systems based on extruded polystyrene 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기