관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
| 분야 | 04.02 : 콘크리트 및 골재 |
|---|---|
| 적용범위 | 1.1 This test method covers determination of compressive strength of cylindrical concrete specimens such as molded cylinders and drilled cores. It is limited to concrete having a density in excess of 800 kg/m3 [50 lb/ft3]. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The inch-pound units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.(Warning—Means should be provided to contain concrete fragments during sudden rupture of specimens. Tendency for sudden rupture increases with increasing concrete strength and it is more likely when the testing machine is relatively flexible. The safety precautions given in the Manual are recommended.) 1.4 The text of this standard references notes which provide explanatory material. These notes shall not be considered as requirements of the standard. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
| 국제분류(ICS)코드 | 91.100.30 : 콘크리트 및 콘크리트 제품 |
| 페이지수 | 8 |
| Edition | 18 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM C39/C39M-24 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens | 2024-06-01 | 표준 |
| 2 | ASTM C39/C39M-24 REDLINE | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens | 2024-06-01 | 표준 |
| 3 | ASTM C39/C39M-23 REDLINE | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens | 2023-12-01 | 구판 |
| 4 | ASTM C39/C39M-23 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens | 2023-12-01 | 구판 |
| 5 | ASTM C39/C39M-21 REDLINE | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens | 2021-03-01 | 구판 |
| 6 | ASTM C39/C39M-21 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens | 2021-03-01 | 구판 |
| 7 | ASTM C39/C39M-20 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens | 2020-02-01 | 구판 |
| 8 | ASTM C39/C39M-20 REDLINE | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens | 2020-02-01 | 구판 |
| 9 | ASTM C39/C39M-18 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens | 2018-01-01 | 구판 |
| 10 | ASTM C39/C39M-18 REDLINE | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens | 2018-01-01 | 구판 |
| 11 | ASTM C39/C39M-17b | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens | 2017-08-01 | 구판 |
| 12 | ASTM C39/C39M-17a | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens | 2017-03-15 | 구판 |
| 13 | ASTM C39/C39M-17 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens | 2017-02-01 | 구판 |
| 14 | ASTM C39/C39M-16b | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens | 2016-08-01 | 구판 |
| 15 | ASTM C39/C39M-16a | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens | 2016-07-01 | 구판 |
| 16 | ASTM C39/C39M-16 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens | 2016-03-01 | 구판 |
| 17 | ASTM C39/C39M-15a | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens | 2015-04-01 | 구판 |
| 18 | ASTM C39/C39M-15 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens | 2015-03-15 | 구판 |
| 19 | ASTM C39/C39M-14a | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens | 2014-06-01 | 구판 |
| 20 | ASTM C39/C39M-14 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens | 2014-02-01 | 구판 |
| 21 | ASTM C39/C39M-12a | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens | 2012-09-01 | 구판 |
| 22 | ASTM C39/C39M-12 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens | 2012-02-01 | 구판 |
| 23 | ASTM C39/C39M-11a | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens | 2011-10-15 | 구판 |
| 24 | ASTM C39/C39M-11 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens | 2011-08-01 | 구판 |
| 25 | ASTM C39/C39M-10 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens | 2010-10-01 | 구판 |
| 26 | ASTM C39/C39M-09a | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens | 2009-12-15 | 구판 |
| 27 | ASTM C39/C39M-09 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens | 2009-11-01 | 구판 |
| 28 | ASTM C39/C39M-05e2 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens | 2005-11-01 | 구판 |
| 29 | ASTM C39/C39M-05e1 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens | 2005-11-01 | 구판 |
| 30 | ASTM C39/C39M-05 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens | 2005-11-01 | 구판 |
| 31 | ASTM C39/C39M-04a | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens | 2004-11-01 | 구판 |
| 32 | ASTM C39/C39M-04 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens | 2004-08-01 | 구판 |
| 33 | ASTM C39/C39M-03 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens | 2003-07-10 | 구판 |
| 34 | ASTM C39/C39M-99 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens | 1999-07-10 | 구판 |
| 35 | ASTM C39/C39M-01 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens | 1999-07-10 | 구판 |
관련상품이 존재하지 않습니다.
IEC TR 61850-90-6:2018 - Communication networks and systems for power utility automation - Part 90-6: Use of IEC 61850 for Distribution Automation Systems 상세보기
IEC 61850-6:2009 - Communication networks and systems for power utility automation - Part 6: Configuration description language for communication in electrical substations related to IEDs 상세보기
ASME B30.16 - 2017 - Overhead Underhung and Stationary Hoists 상세보기
ASTM D2049 1969 Edition - Test Method for Relative Density of Cohesionless Soils 상세보기
ASTM D420 1987 Edition - STANDARD GUIDE FOR INVESTIGATING AND SAMPLING SOIL AND ROCK 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
