관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Standard Terminology for Aircraft
| 분야 | 15.09 : 종이, 회사 이미지용 상품 |
|---|---|
| 적용범위 | 1.1 This terminology contains a listing of terms, abbreviations, acronyms, and symbols related to aircraft covered by ASTM Committees F37 and F44 airworthiness design standards. It is intended to ensure the consistent use of terminology throughout all ASTM light aircraft standards. 1.2 Units—The definitions of units will be as defined in NIST SP 330 and will not be duplicated in this document. NIST SP 330 is available on the internet. The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.3 Source References—The listed document(s) was/were the original source for the definition. However, the definition may have been edited for use in this document and the F37 and F44 standards and may not completely match the original in every respect. 1.4 A definition adapted from a particular standard within the ASTM aircraft collection of standards is not limited to use within only those standards. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
| 국제분류(ICS)코드 |
01.040.49 : 항공기 및 우주선 공학 (용어)
49.020 : 항공기 및 우주선 일반 |
| 페이지수 | 14 |
| Edition | 16a |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM F3060-20 | Standard Terminology for Aircraft | 2020-01-01 | 표준 |
| 2 | ASTM F3060-20 REDLINE | Standard Terminology for Aircraft | 2020-01-01 | 표준 |
| 3 | ASTM F3060-16a REDLINE | Standard Terminology for Aircraft | 2016-11-01 | 구판 |
| 4 | ASTM F3060-16a | Standard Terminology for Aircraft | 2016-11-01 | 구판 |
| 5 | ASTM F3060-16 | Standard Terminology for Aircraft | 2016-04-01 | 구판 |
| 6 | ASTM F3060-15b | Standard Terminology for Aircraft | 2015-09-15 | 구판 |
| 7 | ASTM F3060-15a | Standard Terminology for Aircraft | 2015-05-01 | 구판 |
| 8 | ASTM F3060-15 | Standard Terminology for Aircraft | 2015-03-01 | 구판 |
| 9 | ASTM F3060-14 | Standard Terminology for Aircraft | 2014-12-01 | 구판 |
관련상품이 존재하지 않습니다.
ASTM F3364-19 - Standard Practice for Independent Audit Program for Unmanned Aircraft Operators 상세보기
ASTM F3298-19 - Standard Specification for Design, Construction, and Verification of Lightweight Unmanned Aircraft Systems (UAS) 상세보기
ASTM F3365-19 - Standard Practice for Compliance Audits to ASTM Standards on Unmanned Aircraft Systems 상세보기
ASTM F3196-18 - Standard Practice for Seeking Approval for Beyond Visual Line of Sight (BVLOS) Small Unmanned Aircraft System (sUAS) Operations 상세보기
ASTM F3330-18 - Standard Specification for Training and the Development of Training Manuals for the UAS Operator 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
