관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Standard Test Method for Determining Integrity of Seals for Flexible Packaging by Visual Inspection
| 분야 | 15.10 : 포장 |
|---|---|
| 적용범위 | 1.1 This test method covers the determination of channels in the package seal down to a width of 75 μm [0.003 in.] with a 60–100 % probability (see Section 8). 1.1.1 The ability to visually detect channel defects in package seals is highly dependent on the size of channel, the degree of contrast from sealed and unsealed areas, the amount and type of adhesive between the two package layers, reflecting light angle, types of material used, the use of magnification, and the inspector's level of training and experience. 1.2 This test method is applicable to packages with at least one transparent side so that the seal area may be clearly viewed. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
| 국제분류(ICS)코드 | 55.040 : 포장 자재 및 부속품 |
| 페이지수 | 4 |
| Edition | 16 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM F1886/F1886M-16(2024) | Standard Test Method for Determining Integrity of Seals for Flexible Packaging by Visual Inspection | 2024-11-01 | 표준 |
| 2 | ASTM F1886/F1886M-16 | Standard Test Method for Determining Integrity of Seals for Flexible Packaging by Visual Inspection | 2016-10-01 | 구판 |
| 3 | ASTM F1886/F1886M-16 REDLINE | Standard Test Method for Determining Integrity of Seals for Flexible Packaging by Visual Inspection | 2016-10-01 | 구판 |
| 4 | ASTM F1886/F1886M-09(2013) | Standard Test Method for Determining Integrity of Seals for Flexible Packaging by Visual Inspection | 2013-08-01 | 구판 |
| 5 | ASTM F1886/F1886M-09 | Standard Test Method for Determining Integrity of Seals for Flexible Packaging by Visual Inspection | 2009-10-01 | 구판 |
관련상품이 존재하지 않습니다.
ASTM F88/F88M-15 - Standard Test Method for Seal Strength of Flexible Barrier Materials 상세보기
ASTM D4169-16 - Standard Practice for Performance Testing of Shipping Containers and Systems 상세보기
ASTM F1929-15 - Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration 상세보기
ASTM F116-12(2016) - Standard Specification for Medical Screwdriver Bits 상세보기
ASTM F2706-18 - Standard Test Methods for Occipital-Cervical and Occipital-Cervical-Thoracic Spinal Implant Constructs in a Vertebrectomy Model 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
