관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
폐지
판매
Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts (Withdrawn 2024)
| 분야 | 08.01 : 플라스틱 (Ⅰ) |
|---|---|
| 적용범위 | 1.1 This practice covers acceptance criteria for visual inspection of parts made from molded glass-reinforced plastic laminates. 1.2 This practice presents word descriptions of possible defects to serve as a guide for contracts, drawings, product specifications, and final inspection. 1.3 This practice also categorizes different inspection requirements for levels of product quality. 1.4 The allowable size and frequency of permitted defects within the acceptance level categories of this specification are general and not related to specific service requirements. A Level IV of allowable defects which defines allowable size, frequency, and permitted repair procedures should be established for specific service requirements as agreed upon between the purchaser and the supplier. 1.5 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 1: There is no known ISO equivalent to this standard. |
| 국제분류(ICS)코드 | 83.120 : 강화 플라스틱 |
| 페이지수 | 24 |
| Edition | 08(2015) |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM D2563-08(2015) | Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts (Withdrawn 2024) | 2015-09-01 | 폐지 |
| 2 | ASTM D2563-08 | Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts | 2008-05-01 | 구판 |
| 3 | ASTM D2563-94 | Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts | 1994-02-15 | 구판 |
| 4 | ASTM D2563-94(2002)e1 | Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts | 1994-02-15 | 구판 |
관련상품이 존재하지 않습니다.
ASTM D3517-19 - Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe 상세보기
ASTM D5685-19 - Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings 상세보기
ASTM D5365-18 - Standard Test Method for Long-Term Ring-Bending Strain of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe 상세보기
ASTM D5421-15 - Standard Specification for Contact Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges 상세보기
ASTM D2583-13a - Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor (Withdrawn 2022) 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
