관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
분야 | 04.08 : 토양, 석재 (Ⅰ) |
---|---|
적용범위 | 1.1 These test methods cover the measurement of moisture content, ash content, and organic matter in peats and other organic soils, such as organic clays, silts, and mucks. Test Method D2216 provides an alternative method for determining moisture content in mineral soils and rock. 1.1.1 Test Method A—Moisture is determined by drying peat or organic sample at 110 ± 5°C. 1.1.2 Test Method B—Alternative moisture method which removes the total moisture in two steps: (1) evaporation of moisture at room temperature, (2) subsequent oven drying of air dried sample at 110 ± 5°C. This method is used when the peat is to be used as fuel. 1.1.3 Test Method C—Ash content of a peat or organic soil sample, for general purposes, is determined by igniting oven dried sample from moisture content determination in a furnace at 440 ± 40°C. 1.1.4 Test Method D—Ash content of a peat or organic soil sample, for materials used for fuel, is determined by igniting oven dried sample from moisture content determination in a furnace at 750 ± 38°C. 1.2 Test Method A should be used for general classification, except for use of the peat as a fuel. Test Method B should be used when peats are being evaluated for use as a fuel 1.3 The values stated in SI units are to be regarded as the standard. No other units of measurement are included in this standard. 1.4 All observed and calculated values shall conform to the guidelines for significant digits and rounding established in Practice D6026. 1.4.1 The procedures used to specify how data are collected/recorded or calculated in this standard are regarded as the industry standard. In addition, they are representative of the significant digits that generally should be retained. The procedures used do not consider material variation, purpose for obtaining the data, special purpose studies, or any considerations for the user’s objectives; and it is common practice to increase or reduce significant digits of reported data to be commensurate with these considerations. It is beyone the scope of this standard to consider significant digits used in analysis methods for engineering design. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
국제분류(ICS)코드 | 65.080 : 소독 |
페이지수 | 4 |
Edition | 14 |
No. | 표준번호 | 표준명 | 발행일 | 상태 |
---|---|---|---|---|
1 | ASTM D2974-20 | Standard Test Methods for Determining the Water (Moisture) Content, Ash Content, and Organic Material of Peat and Other Organic Soils | 2020-01-15 | 구판 |
2 | ASTM D2974-20 REDLINE | Standard Test Methods for Determining the Water (Moisture) Content, Ash Content, and Organic Material of Peat and Other Organic Soils | 2020-01-15 | 구판 |
3 | ASTM D2974-20e1 | Standard Test Methods for Determining the Water (Moisture) Content, Ash Content, and Organic Material of Peat and Other Organic Soils | 2020-01-15 | 표준 |
4 | ASTM D2974-14 | Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils | 2014-11-01 | 구판 |
5 | ASTM D2974-14 REDLINE | Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils | 2014-11-01 | 구판 |
6 | ASTM D2974-13 | Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils | 2013-06-01 | 구판 |
7 | ASTM D2974-07a | Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils | 2007-03-15 | 구판 |
8 | ASTM D2974-07 | Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils | 2007-01-01 | 구판 |
9 | ASTM D2974-00 | Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils | 2000-08-10 | 구판 |
관련상품이 존재하지 않습니다.
ASTM D1557-12e1 - Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3)) 상세보기
ASTM D698-12e2 - Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3)) 상세보기
ASTM D5059-14 - Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy 상세보기
ASTM D4982-12 - Standard Test Methods for Flammability Potential Screening Analysis of Waste 상세보기
ASTM D5058-12 - Standard Practices for Compatibility of Screening Analysis of Waste 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기