관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Standard Specification for Testing Off-Road Motorcycle and ATV Helmets
| 분야 | 15.07 : 스포츠 장비와 시설, 보행자 보도 안전과 신발 안전, 놀이 기구 |
|---|---|
| 적용범위 | 1.1 This specification covers performance requirements for helmets used by off-road motorcycle and All-Terrain Vehicle (ATV) riders. 1.2 Compliance with the federally mandated FMVSS No. 218 shall be documented as part of compliance with this ASTM standard. 1.3 This specification provides additional performance requirements including positional stability and performance criteria for chin bars on full-facial coverage helmets if the helmet is equipped with a chin bar. 1.4 This standard does not require that helmets provide full facial coverage. 1.5 This is a performance specification and is not intended to restrict design. 1.6 All testing and requirements of this specification shall be in accordance with Test Methods F1446, except where noted herein. 1.7 Partial utilization of this standard is prohibited. Any statement of compliance with this specification must be a certification that the product meets all of the requirements of this specification in its entirety. A product that fails to meet any one of the requirements of this specification is considered to have failed this standard, and should not be sold with any indication that it meets parts of this standard. 1.8 Headgear designed to comply with this and other standards may proclaim uses as certified by the manufacturer. 1.9 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.10 The following safety caveat applies to the chemical, mechanical, or physical, or a combination thereof, test methods described herein and is meant specifically for those performing the tests (in an effort to provide them with notice to take the appropriate precautions when conducting the tests): This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
| 국제분류(ICS)코드 | |
| 페이지수 | 3 |
| Edition | 14 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM F3103-14 | Standard Specification for Testing Off-Road Motorcycle and ATV Helmets | 2014-09-01 | 표준 |
관련상품이 존재하지 않습니다.
ASTM F2032-22 - Standard Specification for Helmets Used for BMX Cycling 상세보기
ASTM F1952-22 - Standard Specification for Helmets Used for Downhill Mountain Bicycle Racing 상세보기
ASTM E3299/E3299M-21a - Standard Test Methods for Compression Resistance of Helmets 상세보기
ASTM F2812-12(2018) - Standard Specification for Goggle- and Spectacle-Type Eye Protectors for Selected Motor Sports (Withdrawn 2024) 상세보기
ASTM F1163-15 - Standard Specification for Protective Headgear Used in Horse Sports and Horseback Riding 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
