관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens
| 분야 | 03.01 : 금속-기계적 시험;가열 및 저온시험;금속 조직학 |
|---|---|
| 적용범위 | 1.1 These test methods cover procedures for estimating the depth of decarburization of steels irrespective of the composition, matrix microstructure, or section shape. The following basic procedures may be used: 1.1.1 Screening methods. 1.1.2 Microscopical methods. 1.1.3 Microindentation hardness methods. 1.1.4 Chemical analysis methods. 1.2 In case of a dispute, the rigorous quantitative or lineal analysis method (see 7.3.5 and 7.3.6) shall be the referee method. These methods can be employed with any cross-sectional shape. The chemical analytical methods generally reveal a greater depth of decarburization than the microscopical methods but are limited to certain simple shapes and by availability of equipment. These techniques are generally reserved for research studies. The microindentation hardness method is suitable for accurate measurements of hardened structures with relatively homogeneous microstructures. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
| 국제분류(ICS)코드 | 77.080.20 : 일반 강철 |
| 페이지수 | 10 |
| Edition | 14 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM E1077-14(2021) | Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens | 2021-06-01 | 표준 |
| 2 | ASTM E1077-14 | Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens | 2014-01-01 | 구판 |
| 3 | ASTM E1077-14 REDLINE | Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens | 2014-01-01 | 구판 |
| 4 | ASTM E1077-01(2005) | Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens | 2005-05-01 | 구판 |
| 5 | ASTM E1077-91(1997) | Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens | 2001-03-10 | 구판 |
| 6 | ASTM E1077-01 | Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens | 2001-03-10 | 구판 |
| 7 | ASTM E1077-01e1 | Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens | 2001-03-10 | 구판 |
관련상품이 존재하지 않습니다.
ASTM A751-14a - Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products 상세보기
ASTM E140-12be1 - Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness 상세보기
ASTM E1508-12a - Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy 상세보기
ASTM NACE/ASTMG31-12a - Standard Guide for Laboratory Immersion Corrosion Testing of Metals 상세보기
ASTM E18 - 19 - Standard Test Methods for Rockwell Hardness of Metallic Materials 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
