ASTM F1372-93(2012) Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components

관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.

PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)

PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)

구판 판매

Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components

언어	제공형태	판매가격	선택
영어	PDF	113,400원
영어	PRINT	113,400원

장바구니 담기

상품이 장바구니에 담겼습니다.

장바구니로 이동

분야	10.04 : 전자
적용범위	1.1 This test method covers the testing of interior surfaces of components such as tubing, fittings, and valves for surface morphology. 1.2 This test method applies to all surfaces of tubing, connectors, regulators, valves, and any metal component, regardless of size. 1.3 Limitations: 1.3.1 This methodology assumes a SEM operator skill level typically achieved over a 12-month period. 1.3.2 This test method shall be limited to the assessment of pits, stringer, tears, grooves, scratches, inclusions, stepped grain boundaries, and other surface anomalies. However, stains and particles that may be produced during specimen preparation should be excluded in the assessment of anomalies. 1.4 The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 6.
국제분류(ICS)코드	17.040.20 : 표면 성질
페이지수	4
Edition	93(2012)

No.	표준번호	표준명	발행일	상태
1	ASTM F1372-93(2020)	Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components (Withdrawn 2023)	2020-04-15	폐지
2	ASTM F1372-93(2012)	Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components	2012-07-01	구판
3	ASTM F1372-93(2005)	Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components	1999-06-10	구판
4	ASTM F1372-93(1999)	Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components	1999-06-10	구판