관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
분야 | 01.01 : 철강-배관, 튜브, 관이음쇠 |
---|---|
적용범위 | 1.1 This specification covers forged carbon steel piping components for ambient- and higher-temperature service in pressure systems. Included are flanges, fittings, valves, and similar parts ordered either to dimensions specified by the purchaser or to dimensional standards such as the MSS, ASME, and API specifications referenced in Section 2. Forgings made to this specification are limited to a maximum weight of 10 000 lb [4540 kg]. Larger forgings may be ordered to Specification A266/A266M. Tubesheets and hollow cylindrical forgings for pressure vessel shells are not included within the scope of this specification. Although this specification covers some piping components machined from rolled bar and seamless tubular products (see 4.2), it does not cover raw material produced in these product forms. 1.2 Supplementary requirements are provided for use when additional testing or inspection is desired. These shall apply only when specified individually by the purchaser in the order. 1.3 Specification A266/A266M covers other steel forgings and Specifications A675/A675M and A696 cover other steel bars. 1.4 This specification is expressed in both inch-pound units and SI units. However, unless the order specifies the applicable “M” specification designation (SI units), the material shall be furnished to inch-pound units. The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.5 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. Note 1—The dimensionless designator NPS (nominal pipe size) has been substituted in this standard for such traditional terms as “nominal diameter,” “size,” and “nominal size.” |
국제분류(ICS)코드 | 77.140.85 : 철강 단조 |
페이지수 | 5 |
Edition | 10 |
No. | 표준번호 | 표준명 | 발행일 | 상태 |
---|---|---|---|---|
1 | ASTM A105/A105M-24 | Standard Specification for Carbon Steel Forgings for Piping Applications | 2024-04-15 | 표준 |
2 | ASTM A105/A105M-24 REDLINE | Standard Specification for Carbon Steel Forgings for Piping Applications | 2024-04-15 | 표준 |
3 | ASTM A105/A105M-23 | Standard Specification for Carbon Steel Forgings for Piping Applications | 2023-05-01 | 구판 |
4 | ASTM A105/A105M-23 REDLINE | Standard Specification for Carbon Steel Forgings for Piping Applications | 2023-05-01 | 구판 |
5 | ASTM A105/A105M-21 | Standard Specification for Carbon Steel Forgings for Piping Applications | 2021-01-01 | 구판 |
6 | ASTM A105/A105M-21 REDLINE | Standard Specification for Carbon Steel Forgings for Piping Applications | 2021-01-01 | 구판 |
7 | ASTM A105/A105M-18 | Standard Specification for Carbon Steel Forgings for Piping Applications | 2018-09-01 | 구판 |
8 | ASTM A105/A105M-18 REDLINE | Standard Specification for Carbon Steel Forgings for Piping Applications | 2018-09-01 | 구판 |
9 | ASTM A105/A105M-14 | Standard Specification for Carbon Steel Forgings for Piping Applications | 2014-10-01 | 구판 |
10 | ASTM A105/A105M-13 | Standard Specification for Carbon Steel Forgings for Piping Applications | 2013-10-01 | 구판 |
11 | ASTM A105/A105M-12 | Standard Specification for Carbon Steel Forgings for Piping Applications | 2012-11-01 | 구판 |
12 | ASTM A105/A105M-11a | Standard Specification for Carbon Steel Forgings for Piping Applications | 2011-12-01 | 구판 |
13 | ASTM A105/A105M-11 | Standard Specification for Carbon Steel Forgings for Piping Applications | 2010-12-01 | 구판 |
14 | ASTM A105/A105M-10a | Standard Specification for Carbon Steel Forgings for Piping Applications | 2010-12-01 | 구판 |
15 | ASTM A105/A105M-10 | Standard Specification for Carbon Steel Forgings for Piping Applications | 2010-05-01 | 구판 |
16 | ASTM A105/A105M-09 | Standard Specification for Carbon Steel Forgings for Piping Applications | 2009-07-01 | 구판 |
17 | ASTM A105/A105M-05 | Standard Specification for Carbon Steel Forgings for Piping Applications | 2005-06-01 | 구판 |
18 | ASTM A105/A105M-03 | Standard Specification for Carbon Steel Forgings for Piping Applications | 2003-10-01 | 구판 |
19 | ASTM A105/A105M-02 | Standard Specification for Carbon Steel Forgings for Piping Applications | 2002-11-10 | 구판 |
20 | ASTM A105/A105M-98 | Standard Specification for Carbon Steel Forgings for Piping Applications | 2001-03-10 | 구판 |
21 | ASTM A105/A105M-00 | Standard Specification for Carbon Steel Forgings for Piping Applications | 2001-03-10 | 구판 |
22 | ASTM A105/A105M-01 | Standard Specification for Carbon Steel Forgings for Piping Applications | 2001-03-10 | 구판 |
관련상품이 존재하지 않습니다.
함께 구입한 상품이 존재하지 않습니다.
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기